Help
Frequently asked questions
Short answers about sizing, product types, packs and ordering. Every dimension below comes from the product records for the Easy-Exs range; the product page and the data sheet for each model have the full details.
Can't find your answer? Send us a message through our contact form or call 888-778-7569. For sizing help, include the model you are considering and your measured opening.
Questions
What is the difference between the opening size and the cover size?
The opening is the hole in the wall or ceiling. The overall cover is the outside size of the panel or door, and it is always larger than the opening it covers. Some products also have a nominal size, which is the size they are sold as. For example, the Easy-Exs SAP0808 has an 8 × 8 in nominal size and a 10 × 10 in overall cover. Never cut a hole to the overall cover size.
How do I measure an opening for an access panel?
Measure the clear width and height of the opening, checking more than one position if the edges are uneven. Also measure the flat surface around all four sides and the space behind the opening. Compare those measurements with the listed opening range of the exact model, not with its cover size. Each model's data sheet has a measuring guide with a table to record your findings.
How do I measure a round opening?
Measure across the center of the opening in two directions at right angles. If the hole is not circular, record the widest and narrowest diameter. Keep the original measurement and units rather than rounding to the nearest whole inch, and compare the opening with the listed opening of the model, not with the old cover.
What is the difference between an access panel and an access door?
Our spring-loaded and Click-Fit access panels are removable covers: the spring or clips on the back hold the cover in the opening, and you remove the whole cover to reach the space behind. Our hinged access doors have a frame with a hinge and latch, and the door stays attached to its frame when you open it. Choose a door if you want the cover to stay attached, and check that there is room for the door to swing.
Why is a hinged door's service opening smaller than its size?
A hinged door is sold by its overall outside size, and the frame takes up part of that area. The service opening is the largest opening you can reach through. For example, the Easy-Exs PAD1212 is 12 × 12 in overall with a 10.35 × 10.35 in maximum service opening (estimated). On these doors the wall cut-out is the size of the service opening, with rounded corners; each door's product page has a full-size template.
Which square spring-loaded panels do you carry?
Two Easy-Exs models. The SAP0808 has an 8 × 8 in nominal size and a 10 × 10 in overall cover; it is adjustable for 6 × 6 to 8 × 8 in openings. The SAP1414 has a 14 × 14 in nominal size and a 16 × 16 in overall cover, and it is adjustable for 10 × 10 to 14 × 14 in openings.
Which hinged access door sizes do you carry?
Four Easy-Exs plastic hinged doors: 6 × 6 in overall with a 4.35 × 4.35 in maximum service opening (PAD0606), 8 × 8 in with 6.35 × 6.35 in (PAD0808), 12 × 12 in with 10.35 × 10.35 in (PAD1212) and 12 × 16 in with 10.35 × 14.35 in (PAD1216), the last two openings estimated from the PAD0808's design, stretched to size.
Do you sell round access panels?
Yes, three Easy-Exs models. The SAP10R has a 10 in overall cover and is listed for round openings from 6 to 9 in. The SAP50 has a 5 in cover for a 4 in opening, and the PAP65 has a 6.5 in cover for a 5.5 in opening. The SAP50 and PAP65 use spring clips.
How many panels come in a pack?
One. Every Easy-Exs panel and door we list is sold as a single piece, the SAP50 and PAP65 round panels included, so the quantity you order is the number of covers you receive.
Are your access panels fire-rated?
Our listings do not establish a fire rating, certification or approval for a particular wall or ceiling assembly. If your wall, ceiling or project needs a rated product, check that the product you select has documentation supporting that exact use, and ask us before you order.
Do you sell metal access panels?
No. Every access panel and door we sell is plastic, in the standard sizes listed on this site.
Do you ship to Alaska, Hawaii or the territories?
Yes, by quote. Shipping to Alaska, Hawaii, Yukon, the Northwest Territories and Nunavut can cost much more than our standard rate, so checkout asks for a shipping quote there instead of charging it. Enter your address at checkout, check your details and send the request; we email you the shipping cost for your items and a link to pay for them at checkout. The quote holds for 14 days. Nothing is charged until you pay, and your cart stays saved.
How do I order?
Add the product to your cart on its product page and check out with a card. Prices are in US dollars on the US site and Canadian dollars on the Canadian site, and checkout shows the shipping and total before you pay. Shipping is USD 9.99 in the US and CAD 14.99 in Canada on orders under 99, and free from 99, counting the products before tax. 10 or more 8 × 8 spring-loaded panels ship free; other orders ship free from $99 before tax.
Can I order for a project or in bulk?
Yes. Online prices per piece drop from 10, 40 and 80 pieces of the same item (1–9, 10–39, 40–79 and 80+), and the cart applies them automatically, with no account or code. Ordering 500 or more? Check out online at the 80+ price, or ask for a custom quote on the Request a quote page; use it too for several models on a project schedule, or delivery needs the cart doesn't cover. Include the models, the number of physical panels, the number of packs and the delivery location. Trades, contractors, property managers and home builders can also send an inquiry through the Contractor Program.
What is the Contractor Program?
It is a way for trades, contractors, property managers, home builders and other project buyers in Canada and the United States to send product and project inquiries. Sending an inquiry starts a conversation. It does not create a credit account, establish a discount, reserve inventory or approve a program application.
How do I switch between the US and Canadian sites?
Use the market switcher (US $ USD or CA $ CAD) at the top of the page. We remember your choice on this device with a cookie. We never redirect you based on your location, so the page you open is the page you see until you choose a market.
Can I pick up an order or return an item at your office?
Orders ship from Vaughan, Ontario, by tracked courier; there is no pickup. Returns go to our Vaughan, Ontario address once you have contacted us with your order number and we have sent you the return instructions; see the returns page.
Where can I find a cut sheet or submittal for a product?
Each model has one data sheet page with four sections: a cut sheet, a submittal worksheet, installation preparation and a measuring guide. You can print it or download it as a PDF. The sheets are prepared by Buy Access Panels and are not manufacturer-certified drawings.
Last updated 2026-11-20
