Skip to content
Buy Access Panels

Networking and cable fishing

Access panels for low-voltage, data and coax cable runs

Fishing data, coax or other low-voltage cable through a finished wall or ceiling often means cutting a hole to get past blocking or to make a turn. An access panel turns that hole into a pull point you can open for the next run. These are panels and doors for reaching into the wall or ceiling, not wall plates for bringing cable out of it.

Prices are in Canadian dollars, and delivery after shipping is usually 2–7 business days in Canada (longer to remote areas). Returns go to our Vaughan, Ontario, Canada address.

9 products

Products

  • EASY-EXS Spring-Loaded Access Panel 8 × 8 in — 10 × 10 in Overall — actual product photograph

    Easy-Exs · SAP0808

    8x8 in Spring-Loaded Plastic Drywall Access Panel

    Rated 4.7 out of 5, 717 ratings online

    Fits 6 × 6 to 8 × 8 in openings · Overall 10 × 10 in

    CAD $10.99 each

    • 10+ panels: $9.49 each
    • 80+ panels: $7.99 each
  • Easy-Exs 8 × 8 in hinged access door, white plastic, open, with a shut-off valve behind the opening

    Easy-Exs · PAD0808

    8x8 in Plastic Drywall Access Panel with Hinged Door

    Rated 4.4 out of 5, 2,785 ratings online

    Maximum service opening 6.35 × 6.35 in · Overall 8 × 8 in

    CAD $9.99 each

    • 10+ panels: $8.99 each
    • 80+ panels: $7.99 each
  • EASY-EXS Spring-Loaded Access Panel 14 × 14 in — 16 × 16 in Overall — actual product photograph

    Easy-Exs · SAP1414

    14x14 in Spring-Loaded Plastic Drywall Access Panel

    Rated 4.7 out of 5, 717 ratings online

    Fits 10 × 10 to 14 × 14 in openings · Overall 16 × 16 in

    CAD $19.99 each

    • 10+ panels: $17.99 each
    • 80+ panels: $15.99 each
  • Easy-Exs 12 × 12 in hinged access door, white plastic, open, with a water meter behind the opening

    Easy-Exs · PAD1212

    12x12 in Plastic Drywall Access Panel with Hinged Door

    Rated 4.4 out of 5, 2,785 ratings online

    Maximum service opening 10.35 × 10.35 in (estimated) · Overall 12 × 12 in

    CAD $14.99 each

    • 10+ panels: $12.49 each
    • 80+ panels: $9.99 each
  • Easy-Exs 6 × 6 in hinged access door, white plastic, open, with a shut-off valve behind the opening

    Easy-Exs · PAD0606

    6x6 in Plastic Drywall Access Panel with Hinged Door

    Rated 4.4 out of 5, 2,785 ratings online

    Maximum service opening 4.35 × 4.35 in · Overall 6 × 6 in

    CAD $8.99 each

    • 10+ panels: $7.99 each
    • 80+ panels: $6.99 each
  • Easy-Exs 12 × 16 in hinged access door, white plastic, open, with a water meter behind the opening

    Easy-Exs · PAD1216

    12x16 in Plastic Drywall Access Panel with Hinged Door

    Rated 4.4 out of 5, 2,785 ratings online

    Maximum service opening 10.35 × 14.35 in (estimated) · Overall 12 × 16 in

    CAD $17.99 each

    • 10+ panels: $14.99 each
    • 80+ panels: $11.99 each

Access panel or low-voltage wall plate?

They solve different problems, and searches for one often turn up the other:

  • A low-voltage wall plate, brush plate or cable pass-through is where cable leaves the wall to reach a device, such as a TV, a router or a speaker. It stays closed around the cable.
  • An access panel or door covers a hole you need to reach into later, such as a pull point, a splice or a turn in the run. It opens or comes off, and nothing passes through it.

We sell the second kind only. If the job needs a cable exit, use a wall plate made for that.

Leave a pull point instead of patching

Fishing cable through a finished wall or ceiling often means cutting an opening to get past horizontal blocking, a fire block or a turn between a wall and a ceiling. Patching that opening means cutting it again for the next run. Covering it with an access panel keeps it ready.

Turn off any circuit near the cut, and check the bay for pipes and power cables before you cut. Our guide to installing an access panel in drywall covers the cut itself.

Which panel fits a cable opening?

Choose by the size and shape of the hole, then by how often you'll open it:

  • A round hole cut with a hole saw. The Click-Fit SAP50 fits round openings of about 3.75 to 4 in and the PAP65 about 5.25 to 5.5 in (the smallest estimated). The SAP10R fits round openings from 6 to 9 in.
  • A small square opening. The SAP0808 fits square openings from 6 × 6 to 8 × 8 in under a 10 × 10 in cover.
  • A larger opening for both hands. The SAP1414 fits square openings from 10 × 10 to 14 × 14 in under a 16 × 16 in cover.
  • A point you'll open often. A hinged door, such as the PAD0808 or PAD1212, stays attached to its frame, so the cover can't go missing between jobs. Each door's page lists its service opening and the cutout it needs.

The sizes chart compares every opening and cover side by side.

Fire blocks and fire-rated walls

A cable run that crosses a fire block, or passes through a fire-rated wall or ceiling, has to be sealed the way your building code requires. An access panel is not part of that seal, and none of our panels or doors is fire-rated.

In Ontario, Article 9.10.13.1 of the 2024 Ontario Building Code requires closures in fire separations to carry the required fire rating. Elsewhere, ask your building department what the adopted code requires. If you aren't sure whether a wall or ceiling is rated, ask the building owner or your building department before you cut.

Keep cables clear of the panel

A pull point only works if it still opens. Leave slack and space behind the panel, route cable beside the opening rather than across it, and don't bundle cable across the back of a door. Your electrical inspector can tell you which rules apply to the run.

For a junction box on a line-voltage circuit in the same wall, see the electrical access panels page.

Questions

Is a low-voltage access panel the same as a low-voltage wall plate?

No. A low-voltage wall plate, or brush plate, is where cable comes out of the wall to a TV, router or other device. The products here cover a hole you need to reach into later, such as a pull point on a cable run. We don't sell wall plates.

What size access panel do I need for fishing cable?

One that covers the hole you cut, with room for your hand and a fish tape. Spring-loaded panels fit square openings from 6 × 6 to 8 × 8 in (SAP0808) or from 10 × 10 to 14 × 14 in (SAP1414). For a round hole cut with a hole saw, the round covers fit openings of about 3.75 to 4 in, about 5.25 to 5.5 in (the smallest estimated), or from 6 to 9 in.

Can I put an access panel in a fire-rated wall or ceiling?

Not one of these. None of our panels or doors is fire-rated. In Ontario, Article 9.10.13.1 of the Ontario Building Code requires closures in fire separations to carry the required fire rating. Elsewhere, ask your building department what the adopted code requires for an opening in a rated wall or ceiling.

Can a cable access panel go in a ceiling?

Yes. Both the spring-loaded panels and the hinged doors fit drywall ceilings as well as walls. Overhead, a hinged door stays hanging from its frame when opened, while a removable panel comes down into your hand.

Do cables have to stay clear of an access panel?

Keep them clear so the panel still opens: leave slack, and route cable beside the opening rather than across the back of it. Your electrical inspector can tell you which rules apply to the run.