
Easy-Exs · SAP1414
14x14 in Spring-Loaded Plastic Drywall Access Panel
Rated 4.7 out of 5, 717 ratings online
Fits 10 × 10 to 14 × 14 in openings · Overall 16 × 16 in
CAD $19.99 each
- 10+ panels: $17.99 each
- 80+ panels: $15.99 each
Access panels and doors for your next project
Plumbing access
A plumbing access panel lets you reach shutoff valves, cleanouts and slip joints without cutting the drywall again. Size it to the job: measure the fitting, add room for your hand and the tool, and pick a model whose listed opening is larger. In Canada, the plumbing code asks for slip joints and cleanouts to stay accessible.
Prices are in Canadian dollars, and delivery after shipping is usually 2–7 business days in Canada (longer to remote areas). Returns go to our Vaughan, Ontario, Canada address.
9 products · Updated

Easy-Exs · SAP1414
Rated 4.7 out of 5, 717 ratings online
Fits 10 × 10 to 14 × 14 in openings · Overall 16 × 16 in
CAD $19.99 each

Easy-Exs · PAD1216
Rated 4.4 out of 5, 2,785 ratings online
Maximum service opening 10.35 × 14.35 in (estimated) · Overall 12 × 16 in
CAD $17.99 each

Easy-Exs · PAD1212
Rated 4.4 out of 5, 2,785 ratings online
Maximum service opening 10.35 × 10.35 in (estimated) · Overall 12 × 12 in
CAD $14.99 each

Easy-Exs · SAP0808
Rated 4.7 out of 5, 717 ratings online
Fits 6 × 6 to 8 × 8 in openings · Overall 10 × 10 in
CAD $10.99 each

Easy-Exs · PAD0808
Rated 4.4 out of 5, 2,785 ratings online
Maximum service opening 6.35 × 6.35 in · Overall 8 × 8 in
CAD $9.99 each

Easy-Exs · SAP10R
Rated 4.2 out of 5, 243 ratings online
Fits 6–9 in round openings · Overall 10 in diameter
CAD $11.99 each

Easy-Exs · PAD0606
Rated 4.4 out of 5, 2,785 ratings online
Maximum service opening 4.35 × 4.35 in · Overall 6 × 6 in
CAD $8.99 each

Easy-Exs · PAP65
Rated 4.5 out of 5, 322 ratings online
Fits 5.25–5.5 in round openings (smallest estimated) · Overall 6.5 in diameter
CAD $6.99 each

Easy-Exs · SAP50
Rated 4.5 out of 5, 322 ratings online
Fits 3.75–4 in round openings (smallest estimated) · Overall 5 in diameter
CAD $5.99 each
Plumbing access panel sizes are stated three ways: the opening a panel fits (a door's service opening), the overall cover, and the nominal size in the product name. Size by the opening. Measure the fitting you need to reach, add room for your hand and the tool, and choose a model whose listed opening is larger; the cover always comes out bigger than the hole.
| Job behind the wall | What sets the size | Openings in this range |
|---|---|---|
| One shutoff valve | The valve and its handle, plus room for your hand | PAD0606 door: 4.35 × 4.35 in; PAD0808 door: 6.35 × 6.35 in; SAP0808 panel: 6 × 6 to 8 × 8 in |
| A cleanout plug | The plug, plus room to turn a wrench or feed a rodding tool | SAP0808: 6 × 6 to 8 × 8 in; PAD0808: 6.35 × 6.35 in; SAP10R round panel: holes from 6 to 9 in |
| A tub or shower valve | The valve body and the supply connections, plus room to work | PAD1212 door: 10.35 × 10.35 in (estimated); PAD1216 door: 10.35 × 14.35 in (estimated); SAP1414 panel: 10 × 10 to 14 × 14 in |
| A concealed slip-joint trap | National Plumbing Code 2020, 2025 printing, 2.3.3.4: slip joints only at a fixture trap, in an accessible location; the article gives no opening size | Size by the job; the SAP1414 covers openings from 10 × 10 to 14 × 14 in |
| A whirlpool tub pump | The tub maker's instructions | SAP1414 for a hole up to 14 × 14 in; nothing here is larger |
The access panel sizes chart lists the opening and cover of every model in one table, and the jetted tub page covers pump access. To compare panels and doors from several makers job by job, see our guide to the best access panels for plumbing, by job.
Measure the cleanout plug and the room around it that a wrench or a rodding tool needs, then pick a panel whose listed opening is larger. For a round hole up to 9 in, the round panels fit: the SAP50 covers a 4 in hole, the PAP65 a 5.5 in hole, and the SAP10R a hole from 6 to 9 in under a 10 in cover.
For a square hole, the SAP0808 fits 6 × 6 to 8 × 8 in and the SAP1414 fits 10 × 10 to 14 × 14 in. For a plug you open often, a hinged door keeps the cover attached: the PAD0808 has a 6.35 × 6.35 in service opening and the PAD1212 a 10.35 × 10.35 in (estimated) one.
To find the cleanout in the first place, see what a sewer cleanout is and where it sits and where the kitchen sink cleanout is.
The National Plumbing Code of Canada 2020 (2025 printing) asks for access rather than a size. It asks for fixtures, cleanouts, valves and equipment to be readily accessible for use, cleaning and maintenance (Article 2.1.3.2), and it allows a slip joint in a drain only to connect a fixture trap, in an accessible location (Article 2.3.3.4). Neither article gives an opening size. Your province's code may add to them, so check with your local building department before you size the opening; the code text is in the NRC Publications Archive.
If your inspector asks for an opening of 12 in or more both ways, only the SAP1414 in this range gives it. The hinged doors are sold by overall size, and each service opening is under 12 in in at least one direction.
For a shutoff valve you might need in a hurry, a plumbing access door with a hinge and latch opens without leaving a loose cover in your hand. For a slip joint or cleanout you'll visit rarely, a removable spring-loaded panel works, and the SAP1414 is the only model here that covers a 14 × 14 in opening.
The small round Click-Fit panels suit a hole made to reach or look at a single fitting. For the full set of hinged models, see the access doors page.
On the wall or ceiling surface nearest the fittings, ideally the side that's easiest to cut, patch and live with: the back of a closet, the room behind a bathroom, or the ceiling below a fixture. Put it where you can kneel or stand square to it with a tool in your hand.
For a tub or shower, the panel normally goes on the back of the wall rather than the tiled side; the bathtub and shower valve pages cover those cases.
Check what's in the wall, then mark the opening from the product's listed range, not its cover. Shut off the water if you'll be working near supply lines, make a small exploratory cut first, and confirm the pipes and studs are where you expect before you open the hole to full size.
Before ordering, measure the flat drywall around all four sides of the planned opening; each product page asks for this because the cover has to sit flat. For a hinged door, cut to the template on the product page: the cut-out is the size of the service opening, with rounded corners. None of these panels or doors is fire-rated, and a general product description does not establish a fire rating, certification or approval for a particular wall or ceiling assembly.
In Canada, the National Plumbing Code 2020 (2025 printing) allows a slip joint in a drain only to connect a fixture trap, and only in an accessible location (Article 2.3.3.4); that article gives no opening size. Your province's code may add to it, so check with your local building department. In this range, the SAP1414 fits square openings from 10 × 10 up to 14 × 14 in.
No. The PAD1212 is 12 × 12 in overall, including its frame, and its maximum service opening is 10.35 × 10.35 in (estimated). If you need an opening of 12 in or more in both directions, compare the SAP1414 spring-loaded panel.
The hinged doors: PAD0606, PAD0808, PAD1212 and PAD1216 each use a hinge and latch. The spring-loaded and Click-Fit panels have no hinge or latch; they are removable covers held in place by a spring or spring clips.
The product records make no waterproof or moisture claim for any model. Place the panel where it stays dry, and ask us before fitting one in a location that gets wet.
No. Every access panel and door we sell is white plastic.
A cleanout has to stay reachable. The National Plumbing Code of Canada 2020 (2025 printing) asks for every cleanout to be located so it is readily accessible for use, cleaning and maintenance (Article 2.1.3.2), and for cleanout openings to be readily accessible for drain cleaning (Article 2.4.7.4). Behind a finished wall, an access panel is one way in. Your province's code may add to it, so check with your local building department.
Yes, for a round hole up to 9 in. The SAP50 fits a 4 in hole under a 5 in cover, the PAP65 a 5.5 in hole under a 6.5 in cover, and the SAP10R a hole from 6 to 9 in under a 10 in cover.