Skip to content
Buy Access Panels

Easy-Exs product documents

Easy-Exs SAP50 data sheet

Easy-Exs Access Panel Round 4 in Click-Fit (Outside Dimension 5 in) Plastic White

Fits 3.75–4 in round openings (smallest estimated) · overall 5 in diameter · 1 panel

Retailer-prepared data sheet · Model SAP50 · Reviewed October 29, 2026

Easy-Exs 5 in round Click-Fit access panel, front label and back with spring clips
Document status

Prepared by Buy Access Panels as a product-information summary. It is not a manufacturer-certified drawing, performance certificate, specification approval or installation cutout template.

A listed measurement does not establish a fire rating or approval for a rated assembly. Obtain the current manufacturer document if your project requires that evidence. Where we publish a manufacturer document, it carries its own issuer and revision.

Cut sheet

Retailer-prepared reference sheet · Model SAP50

This Buy Access Panels reference sheet summarizes the Easy-Exs Access Panel Round 4 in Click-Fit (Outside Dimension 5 in) Plastic White. Use the model and store SKU to connect this information with the exact sellable item. The verified product record governs product identity; product images are photographs or renders from the manufacturer's CAD.

Product detailModel information
BrandEasy-Exs
ModelSAP50
Store SKUEEXS-SAP50
Product typePlastic round Click-Fit access panel
Material / colorPlastic / white
FinishWhite texture
Overall outside cover5 in diameter
Listed opening information3.75–4 in diameter (smallest estimated)
Pack contents1 panel
MechanismOpposing spring clips

Technical drawing and cut-out

Front, back, edge and 3D views of the SAP50, drawn by Buy Access Panels from the manufacturer's CAD. Dimensions are in inches, with millimetres in brackets. The cover measures 5.00 in across. It is drawn with its clips set, as they go into the hole; the spring is not drawn. It is not a manufacturer-certified drawing.

Technical drawing of the SAP50 round access panel: front, back, edge and 3D views with dimensions. Cover 5.00 in (127.0 mm) across; 0.20 in (5.0 mm) in front of the wall. With the clips set it reaches 1.78 in (45.1 mm) behind the wall surface; the guards on the back are 3.62 in across.
Full-size copies: SAP50 technical drawing (PDF) and SAP50 cut-out template (PDF, print at 100%). Drawn 2026-11-19.
Measured from the CADDimension
Cover, measured5.00 in (127.0 mm) across
In front of the wall0.20 in (5.0 mm)
Behind the wall surface, clips set1.78 in (45.1 mm)
Widest part of the back (its guards)3.62 in (91.9 mm) across
Clips set, tip to tip4.33 in (110.0 mm)

How to read these dimensions

The SAP50 is a round panel with a 5 in outside diameter and a 3.75–4 in round opening range (the 4 in is listed; the 3.75 in is estimated from its CAD). Write "diameter" or use the diameter symbol on your schedule, rather than describing this circle as a square 5 × 5 product. Compare this model's own mechanism and photographs rather than another round model's.

Measure through the center in two directions. If the opening is uneven, record its widest and narrowest diameter and assess the edge condition rather than selecting a cover using one convenient measurement.

Selection checks

Confirm the intended opening, surface condition and access task before ordering. Consider the room available behind the cover and any obstruction in front. The front photograph alone does not show every installation condition. A photograph showing front and back views is not evidence of an additional panel in the pack.

The barcode shown in the product record must correspond to this exact pack. Do not substitute a single-panel barcode for a different multipack. Prices, availability and order currency are live commercial data on the product page, not permanent specifications in this sheet.

Document scope

Prepared by Buy Access Panels as a product-information summary. It is not a manufacturer-certified drawing, performance certificate, specification approval or installation cutout template.

A listed measurement does not establish a fire rating or approval for a rated assembly. Obtain the current manufacturer document if your project requires that evidence. Where we publish a manufacturer document, it carries its own issuer and revision.

You can print this sheet from your browser or download the same content as a PDF.

Submittal worksheet

Retailer-prepared project worksheet · Model SAP50

Use this Buy Access Panels project worksheet to assemble the product information and project review details for the Easy-Exs Access Panel Round 4 in Click-Fit (Outside Dimension 5 in) Plastic White. This is a fillable procurement and review record, not a manufacturer certificate or evidence that the product has been approved for a specific project.

Product detailModel information
BrandEasy-Exs
ModelSAP50
Store SKUEEXS-SAP50
Product typePlastic round Click-Fit access panel
Pack contents1 panel

Product selection note

The SAP50 is a round panel with a 5 in outside diameter and a 3.75–4 in round opening range (the 4 in is listed; the 3.75 in is estimated from its CAD). Write "diameter" or use the diameter symbol on your schedule, rather than describing this circle as a square 5 × 5 product. Compare this model's own mechanism and photographs rather than another round model's.

Project information to complete

Project fieldEnter the project information
Project name and referenceTo be completed
Prepared by / companyTo be completed
Date preparedTo be completed
Location or drawing referenceTo be completed
Required physical panel quantityTo be completed
Packs requiredTo be completed
Measured opening / service requirementTo be completed
Intended installation surface and locationTo be completed
Specification section / proposed substitutionTo be completed
Required performance documentationTo be completed

The panel count and pack count are different fields. This offer contains 1 panel. If the order or pack changes, recheck the sellable item and identifier before issuing a purchasing instruction.

Attach evidence relevant to the review

Identify the current product page or cut sheet and the manufacturer instructions or drawing actually used. Add the issuer and revision where available. If a fire rating, certification, origin statement or other project evidence is required, attach evidence for this exact model and use; do not infer it from a general description or company location.

Reviewer decision

Review fieldCompleted by the project's authorized reviewer
Reviewer name / roleTo be completed
Decision and conditionsTo be completed
Document references checkedTo be completed
Review dateTo be completed

A blank review field is a place for the project's decision, not an unfinished claim that a review has already happened. Signing or completing this worksheet does not create a warranty, credit agreement or certification from Buy Access Panels. Keep the completed record with the project's own documents.

Print this worksheet for use in your project process. The website does not need to collect or store the project's completed worksheet to provide this resource.

Installation preparation

Retailer-prepared installation preparation guide · Model SAP50

Review the product identity, opening information and preparation checks for the Easy-Exs Access Panel Round 4 in Click-Fit (Outside Dimension 5 in) Plastic White before beginning work. This is a retailer-prepared installation preparation guide. It does not replace the current manufacturer procedure for cutting, mounting, fitting or removing the exact model.

Identify the product and mechanism

The mechanism listed for the SAP50 is: opposing spring clips. Compare the model's rear-view photograph before following instructions found elsewhere. A guide for a different spring arrangement or a permanently framed hinged product may not apply.

Before opening or cutting the surface

Check the proposed access location for concealed wiring, plumbing and other services. Do not cut or fasten into an area that has not been assessed appropriately. Where the construction or task needs a qualified trade or other project professional, obtain that assessment before work starts.

Measure through the center in two directions. If the opening is uneven, record its widest and narrowest diameter and assess the edge condition rather than selecting a cover using one convenient measurement.

Verify that the finished surface and rear space meet the selected model's requirements. Do not modify the spring, clips, frame or latch to force a fit. If a current drawing or instruction is needed to confirm a cutout or mounting method, obtain it before marking the cut line.

Information to confirm in the manufacturer instructions

Check the model designation, required opening or cutout, permitted surface thickness, retaining or mounting method, clearance and any removal procedure. Follow only the method stated for that model. Do not assume fastener type, adhesive use, spring adjustment, clip sequence or suitability for a ceiling from another product's illustration.

For a removable spring product, check how the retaining mechanism engages and how the cover is handled for removal. These are questions to resolve from the actual instructions, not generic steps authorizing an unverified method.

Fit and use review

After an installation performed according to the correct instructions, check that the cover or door seats as intended, access is practical, and no service or mechanism is strained. Stop using a product that is damaged, unstable or not retaining as intended, and seek guidance for the exact model.

A neat fit does not establish a required fire rating or approval for an assembly. Keep any required performance and project-review documents with the installation record.

Need the full procedure?

Contact the Customer Service Team at 888-778-7569 or through buyaccesspanels.com/contact with model SAP50 and the installation question. Any manufacturer document supplied later keeps its own issuer, model and revision. Do not label this preparation summary as an official manufacturer manual.

Measuring guide

Retailer-prepared measuring guide · Model SAP50

Collect the opening and surrounding-space measurements before choosing the Easy-Exs Access Panel Round 4 in Click-Fit (Outside Dimension 5 in) Plastic White. The figures on this sheet identify the model; they do not tell you to cut a new hole without the current installation requirements.

Measure an existing opening

Measure across the center of the opening in two directions at right angles. Record the widest and narrowest diameter if the hole is not circular. Keep the original measurement and units rather than rounding to the nearest whole inch. Compare the opening information above with the actual hole, not only the old cover.

Measure through the center in two directions. If the opening is uneven, record its widest and narrowest diameter and assess the edge condition rather than selecting a cover using one convenient measurement.

Check the surface and clearances

Note damage, uneven edges, obstructions and nearby fittings. A product may cover the visible hole while still lacking the support or clearance its mechanism needs. Do not make the cover fit by altering the retaining hardware. If the surface or location requires repair or professional assessment, resolve that before fitting the product.

Record your findings

Measurement or noteYour record
Clear opening width × height, or diameterTo be completed
Narrowest / widest point if irregularTo be completed
Surrounding flat surface availableTo be completed
Space or obstructions behindTo be completed
Nearby fixture / door-movement restrictionTo be completed
Original measurement unitsTo be completed
Model being comparedSAP50

Before creating a new opening

Obtain the exact model's current installation drawing or procedure and have the location checked for concealed services and relevant construction requirements. A nominal size, outer cover or service-opening figure is not a substitute for a verified cutout instruction.

If you need help comparing the measurements, send the model, the values above and an explanation of the intended access task through buyaccesspanels.com/contact, or call 888-778-7569. A photograph can support the question, but it does not replace physical measurements or the appropriate on-site assessment.

For project quantities, send the model, required physical panel count, pack count and delivery location through the Contractor Program.

Online version: https://www.buyaccesspanels.com/data-sheets/sap50/

Data sheets for other models

  • SAP0808 Easy-Exs 8x8 in Spring-Loaded Plastic Drywall Access Panel
  • SAP1414 Easy-Exs 14x14 in Spring-Loaded Plastic Drywall Access Panel
  • PAP65 Easy-Exs Access Panel Round 5.5 in Click-Fit (Outside Dimension 6.5 in) Plastic White
  • SAP10R Easy-Exs 10 in Round Spring-Loaded Access Panel for 6–9 in Openings
  • PAD0606 Easy-Exs 6x6 in Plastic Drywall Access Panel with Hinged Door
  • PAD0808 Easy-Exs 8x8 in Plastic Drywall Access Panel with Hinged Door
  • PAD1212 Easy-Exs 12x12 in Plastic Drywall Access Panel with Hinged Door
  • PAD1216 Easy-Exs 12x16 in Plastic Drywall Access Panel with Hinged Door

All data sheets