Skip to content
Buy Access Panels

Brand comparison

Acudor access panels and doors compared with Easy-Exs

Acudor is best known for steel access doors, and it also makes two plastic products: the PC-2000 spring cover and the PA-3000 plastic access door. Those are the ones to compare with the Easy-Exs range of plastic spring panels and hinged doors. This page sets out what each maker publishes, checked on November 15, 2026.

9 products

Products

The short answer

For a spring cover in a hole you already have, the PC-2000 and the Easy-Exs SAP0808 and SAP1414 do the same job in the same 10 × 10 and 16 × 16 in covers; Acudor adds a middle 13 × 13 in size. For a hinged plastic door, the PA-3000 and the Easy-Exs PAD doors both have a hinge and latch, but the two makers measure their sizes differently, so compare the hole each needs. For steel, insulated or fire-rated doors, Acudor makes them and we don't.

Spring covers

Acudor PC-2000Easy-Exs spring panels
Covers10 × 10, 13 × 13 and 16 × 16 in10 × 10 in (SAP0808) and 16 × 16 in (SAP1414)
Openings they fit5 × 5 to 8 × 8 in; 8 × 8 to 11 × 11 in; 11 × 11 to 14 × 14 in6 × 6 to 8 × 8 in; 10 × 10 to 14 × 14 in
Material1/8 in high-impact styrene with UV stabilizersPlastic, white textured
How it holdsSpring-held cover with ribbed grippers; a hidden notch marks the side to push in or outOne large wire-loop spring on the back
Where it goesDrywall walls and ceilings (Acudor)Drywall walls and ceilings
PaintingSuitable for finish paint (Acudor)Not stated in our product records

Hinged plastic doors

Acudor PA-3000Easy-Exs PAD doors
Sizes4 × 6 to 24 × 24 in nominal (door size)6 × 6, 8 × 8, 12 × 12 and 12 × 16 in overall
HoleNominal plus 3/8 in (an 8 × 8 needs 8-3/8 × 8-3/8 in)The service opening: 6.35 × 6.35 in for the PAD0808, 10.35 × 10.35 in (estimated) for the PAD1212
Material1/8 in high-impact styrene, door and framePlastic, white gloss
FrameStyrene frame; the door snaps into itFrame screws on over the cut-out
Overall size9.75 × 9.75 in for the 8 × 8, frame included8 × 8 in for the PAD0808, frame included
Hinge and latchConcealed pivot hinge, snap latchesHinge and latch
Fire ratingNon-ratedNot fire-rated

Acudor figures come from its product sheets and submittal; Easy-Exs figures come from our product records.

Where they differ

The 8 to 10 in gap. The middle PC-2000 size covers openings from 8 × 8 to 11 × 11 in. The Easy-Exs spring panels skip that band, so a 9 × 9 in hole needs enlarging to 10 × 10 in for the SAP1414, or a hinged door.

How sizes are named. An Acudor door's nominal size is the door itself; its hole is 3/8 in larger, and the frame's flange covers the rest, so the PA-3000 8 × 8 measures 9.75 × 9.75 in overall. Its door panel lifts off the hinge, so frame and door are separate pieces. An Easy-Exs door's size is its overall outside size, frame included, and its cut-out is smaller: the PAD1212 is 12 × 12 in overall with a 10.35 × 10.35 in (estimated) cut-out, from the PAD0808's design stretched to this size. Measure the hole, not the name, to find the right size; the sizes chart lists every opening and cover.

Acudor steel access doors

Acudor, established in 1976 and based in Roseland, New Jersey, makes access doors, floor doors and roof hatches, and most of its range is steel. Its DW-5040 is a flush access door for drywall, a 20 gauge galvanized door panel in a 26 gauge galvanized frame, from 6 × 6 to 36 × 48 in, with a screwdriver cam latch as standard and an optional cylinder lock. Its UF-5000 is a universal steel or stainless door up to 48 × 48 in. It also lists fire-rated drywall doors. We sell plastic panels and doors only; none is fire-rated.

Which one suits your job

  • A hole between 8 and 10 in across. The 11 × 11 in PC-2000 is listed for it; or enlarge the hole for the SAP1414.
  • A hole from 6 × 6 to 8 × 8 in, or 10 × 10 to 14 × 14 in. Either maker's spring cover. The Easy-Exs panels can be ordered online here in US or Canadian dollars.
  • A shut-off valve you reach often. A hinged door keeps its cover attached: the PA-3000 or an Easy-Exs PAD door.
  • A fire-rated wall or ceiling, a lock or a large steel door. Acudor's steel range covers those; ours doesn't.

Sources

Checked November 15, 2026. Specifications change; the maker's current documents govern.

Acudor and its model names belong to Acudor. Buy Access Panels is not affiliated with or endorsed by Acudor and does not sell Acudor products.

Comparing brands?

Side-by-side notes on the access panel brands people search for, from each maker's published specifications:

All brand comparisons

Questions

Does Acudor make plastic access panels?

Yes, two: the PC-2000 plastic cover held by spring grippers, and the PA-3000 plastic access door with a concealed hinge and snap latches. Both are 1/8 in high-impact styrene, according to its product sheets. Most of the range is steel.

Which fits an opening between 8 and 10 in?

Acudor lists its PC-2000 in an 11 × 11 in size for openings from 8 × 8 to 11 × 11 in, under a 13 × 13 in cover. Neither Easy-Exs spring panel fits that gap as it is: the SAP0808 tops out at 8 × 8 in and the SAP1414 starts at 10 × 10 in, so you would enlarge the hole to 10 × 10 in for the SAP1414.

Why is an Acudor 8 × 8 door a different size from an Easy-Exs 8 × 8 door?

The makers name their doors differently. Acudor's nominal size is the door, and its wall opening is the nominal size plus 3/8 in. An Easy-Exs door's name is its overall size: the PAD0808 is 8 × 8 in overall and needs a 6.35 × 6.35 in cut-out.

Are Acudor or Easy-Exs access panels fire-rated?

The PA-3000 plastic door is non-rated, and Acudor makes separate fire-rated steel doors. None of the Easy-Exs panels or doors is fire-rated, so for a rated wall or ceiling look at a rated steel door from a maker such as Acudor.