Skip to content
Buy Access Panels

Brand comparison

Oatey access panels and Easy-Exs compared

Oatey's plastic access panels, sold as Access Able, are a frame with a snap-in door. The Easy-Exs range has spring-held covers that drop into an opening and hinged doors with a latch. All of them are white plastic, for reaching plumbing or wiring behind drywall. This page sets out what each maker publishes, checked on November 15, 2026, so you can match a product to your opening.

9 products

Products

The short answer

The Access Able panel from Oatey is a fixed plastic frame with a panel door that snaps in, made for one size of wall opening each. An Easy-Exs spring panel is a single cover that fits any opening within its range, and an Easy-Exs door is a framed door on a hinge. If you already have an opening and it falls inside an Easy-Exs range, the spring panel covers it as it is. Both cover a plumbing or wiring opening in drywall. If you're cutting a new plumbing access opening to Oatey's sizes, or you need a 6 × 9 or 14 × 29 in panel, Oatey makes those.

Side by side: 8 × 8 in

Access Able 8 × 8 (34045)Easy-Exs SAP0808Easy-Exs PAD0808
TypePanel frame with a snap-in panel doorSpring-held coverHinged door with a latch
MountingFlush or surface mounting, gluedSpring holds it in the openingFrame screws on over the opening
MaterialHigh-impact polystyrenePlastic, white texturedPlastic, white gloss
Hole8-3/8 × 8-3/8 in wall openingFits 6 × 6 to 8 × 8 in6.35 × 6.35 in cut-out (also its service opening)
Overall size10-1/4 × 10-1/4 in to the outer flange10 × 10 in cover8 × 8 in
How it opensDoor levered out with a flathead screwdriverComes out completelyHinge and latch
Fire ratingNone statedNot fire-ratedNot fire-rated

Side by side: 14 × 14 in

Access Able 14 × 14 (34056)Easy-Exs SAP1414
TypePanel frame with a snap-in panel doorSpring-held cover
MountingFlush or surface mounting, gluedSpring holds it in the opening
MaterialHigh-impact polystyrenePlastic, white textured
Hole14 × 14 in wall openingFits 10 × 10 to 14 × 14 in
Overall size17 × 17 in to the outer flange16 × 16 in cover
How it opensNeeds a screwdriver, for child safety (Oatey)Comes out completely
Fire ratingNone statedNot fire-rated

Oatey figures come from its submittal sheet and product pages; Easy-Exs figures come from our product records.

Where they differ

How each goes in. Oatey's panel is inserted and glued. Its frame is reversible: with flush mounting the inner lip faces the room and the flange sits behind the wall, and with surface mounting the flange stays outside the wall. Construction adhesive on the inner lip holds it; the steps are below. An Easy-Exs spring panel needs no adhesive and nothing fixed to the wall: the cover's spring holds it in the opening, and the cover sits on the wall surface rather than flush. An Easy-Exs door's frame screws on over its service opening. Our guide to installing an access panel in drywall covers the cut for both.

One size or a range. Each Access Able panel has one wall opening size. Each Easy-Exs spring panel fits a range, which helps when the hole is already there and isn't a standard size: the SAP0808 takes anything from 6 × 6 to 8 × 8 in.

Sizes. Oatey sells its panels among its rough plumbing products and lists 6 × 9, 8 × 8, 14 × 14 and 14 × 29 in Access Able panels. Easy-Exs adds hinged doors from 6 × 6 to 12 × 16 in overall and round covers, and has no 6 × 9 or 14 × 29 in model.

How to install an Oatey access panel

Oatey's instruction guide for its plastic access panels gives five steps. In short:

  1. Outline the panel. Hold the panel frame against the wall where you want to place it, balance a leveler on top of the frame, and trace the lip under the panel flange onto the wall with a pencil or marker.
  2. Cut out the outline. Cut along the traced outline with a jab saw, feeling for plumbing pipes or electrical wiring behind the wall so you don't cut into them.
  3. Glue the frame. Run construction adhesive around the inner lip of the frame.
  4. Insert the frame. For surface mounting, insert the frame into the hole with the flange on the outside and press all along the panel flange. For flush mounting, pass the frame through the hole and turn it so the inner lip faces you, then press the flange against the back of the wall.
  5. Assemble the panel door. Click the panel door into place in the frame.

Once the panel is installed, Oatey says you can paint or wallpaper over it.

To install an Easy-Exs spring panel instead, skip the frame, the adhesive and the leveler: once the hole is cut within the panel's range, its spring holds the cover in place in the opening. The cut itself takes the same tools, a pencil or marker for the outline and a jab saw.

Which one suits your job

  • A hole you already have, between 6 × 6 and 8 × 8 in or 10 × 10 and 14 × 14 in. An Easy-Exs spring panel is ideal: it fits without recutting.
  • Plumbing behind a tub or shower. Oatey's blog names tub and shower surrounds as a common place to need a plumbing access panel. Either brand covers the opening; choose by the opening size and how often you'll open it.
  • Wiring behind the wall. Oatey's instructions say to feel for wiring before you cut, and that holds for any panel. Oatey states no fire rating for its panels, and Easy-Exs panels aren't fire-rated.
  • An opening you'll open often. A hinged door keeps its cover attached: the Easy-Exs PAD doors, or a framed panel such as Oatey's.
  • A 6 × 9 in or 14 × 29 in opening. The Access Able line has those sizes; ours doesn't.

Sources and document downloads

Checked November 15, 2026. Specifications change; the maker's current documents govern. Oatey's document downloads include the submittal sheet and the instruction guide listed here.

Oatey and Access Able are Oatey Co.'s names. Buy Access Panels is not affiliated with or endorsed by Oatey and does not sell Oatey products.

Related resources

Comparing brands?

Side-by-side notes on the access panel brands people search for, from each maker's published specifications:

All brand comparisons

Questions

Is an Oatey access panel spring-loaded?

Access Able panels are a frame with a door that snaps into it, according to Oatey's submittal sheet. A spring-loaded 8 × 8 in Oatey panel (34048) appears in distributor listings, but we didn't find it on oatey.com.

What size hole does the Oatey 14 × 14 in panel need?

Oatey's submittal gives a 14 × 14 in wall opening, with the frame reaching 17 × 17 in to its outer flange. The Easy-Exs SAP1414 fits any square opening from 10 × 10 to 14 × 14 in, under a 16 × 16 in cover.

How do you open an Oatey panel door?

Oatey's instructions say to lever the panel door out by pressing a flathead screwdriver into one side, and its 14 × 14 in product page says the door needs a screwdriver to open, for child safety. An Easy-Exs spring panel comes out of the opening completely, and the Easy-Exs doors open on a hinge and latch.

Can Oatey or Easy-Exs panels be painted?

Oatey says its panels accept most paints and wallpapers. The Easy-Exs product records are silent on it, so we can't confirm it for ours.

What tools does an Oatey access panel need?

Oatey's instruction guide uses a leveler, a pencil or marker, a jab saw and construction adhesive to mark, cut, glue and assemble the panel, plus a flathead screwdriver to open it later. An Easy-Exs spring panel needs only something to mark and cut the hole.

Can Oatey or Easy-Exs panels go in ceilings?

Oatey's instruction guide describes fitting its panels in a wall and doesn't mention ceilings. Easy-Exs panels and doors fit drywall ceilings as well as walls: overhead, a hinged door hangs from its frame when opened, while a spring panel comes down into your hands. See ceiling access panels.

Does Oatey make sizes Easy-Exs doesn't?

Yes. Oatey's submittal lists 6 × 9 in and 14 × 29 in Access Able panels, and we have no model in either size. The Easy-Exs range includes round covers and a 12 × 16 in hinged door, which the Access Able line doesn't list.