Skip to content
Buy Access Panels

Brand comparison

MAXESS FlexFit and Easy-Exs spring access panels compared

MAXESS, spelled with one X and not to be confused with Maxxess Systems, the access-control company, is the access panel brand of Novera Products in Ontario. Its FlexFit panels are frameless spring-held covers for a range of hole sizes, like the Easy-Exs SAP0808 and SAP1414. This page sets out what each maker publishes, checked on November 16, 2026.

9 products

Products

The short answer

Both are white plastic spring panels that hold in a hole in drywall with no frame and come out completely. The 8 in sizes are close: a 10 × 10 in cover over openings from 6 × 6 in, with the MAXESS APF8 listed a little larger at the top, to 8-3/4 in. The larger sizes differ: the MAXESS APF12 has a 14 × 14 in panel for openings up to 12-3/4 in, and the Easy-Exs SAP1414 a 16 × 16 in cover for openings up to 14 × 14 in.

Side by side

MAXESS FlexFit APF8Easy-Exs SAP0808MAXESS FlexFit APF12Easy-Exs SAP1414
Panel or cover10 × 10 in10 × 10 in14 × 14 in16 × 16 in
Fits openings6 × 6 to 8-3/4 × 8-3/4 in6 × 6 to 8 × 8 in10 × 10 to 12-3/4 × 12-3/4 in10 × 10 to 14 × 14 in
MaterialHigh-impact styrenePlastic, white texturedHigh-impact styrenePlastic, white textured
How it holdsEnclosed compression spring presses three flanges against the back of the drywallOne large wire-loop spring on the backEnclosed compression spring, three flangesOne large wire-loop spring on the back
PriceCAD 14.99 at Home Hardware (November 16, 2026)On the product pageCAD 22.99 at Home Hardware (November 16, 2026)On the product page
Fire ratingNon-ratedNot fire-ratedNon-ratedNot fire-rated

MAXESS figures come from Novera's spec sheet and Home Hardware's product pages; Home Hardware's copy gives the maximum openings as 8-1/2 and 12-1/2 in. Easy-Exs figures come from our product records.

Where they differ

The largest hole. For an 8 in class hole, the APF8 is listed to 8-3/4 in and the Easy-Exs SAP0808 to 8 × 8 in. For a larger hole, the SAP1414 reaches 14 × 14 in, past the APF12's 12-3/4 in, under a bigger 16 × 16 in cover.

How the spring works. The FlexFit's spring sits inside the panel and presses on the back of the drywall; the next section has the detail. The Easy-Exs spring panels carry one large wire-loop spring on the back of the cover. Both install without a frame, and both come out for access.

Painting. Novera says the FlexFit may be painted or wallpapered. The Easy-Exs spring-loaded panels are paintable to match any color, and the Easy-Exs hinged doors to match your wall. We can't confirm it for the small round covers, so ask us before painting one.

Range. Novera's other options are the MAXESS Slide, with a flush sliding handle that accepts a range of opening sizes, from 6 × 7 to 8-1/2 in and 10 × 11 to 12-1/2 in; the MAXESS Standard, held by a flat spring; and a MAXESS Metal panel fixed to a channel behind the drywall. Easy-Exs adds round covers and hinged plastic doors, such as the PAD1212.

How a MAXESS plastic access panel installs

Novera describes the FlexFit as frameless and spring-fastened: a fully encased linear-tracking spring, a compression spring, presses its three mounting flanges against the back of the drywall, and raised ridges on all three mounting flanges grip the board. Its spec sheet puts the spring tension at about 5 lb at the smallest opening and 2 lb at the largest. The panel can be removed and installed again, and Novera lists it for new installations and for retrofits in drywall walls and ceilings. Home Hardware sells it among its plumbing access panels, across Canada.

An Easy-Exs spring panel installs the same way in principle: cut or measure the hole within the listed range, then fit the cover so its spring holds it in the wall. Our guide to installing an access panel in drywall covers marking and cutting the hole.

About MAXESS and Novera Products Inc.

Novera Products calls itself the original inventor and maker of frameless plastic access panels, since 1994, and says its products are designed and made in Canada; its Slide flyer names Barrie, Ontario. Home Hardware stocks the two FlexFit sizes. Novera also takes orders directly, including bulk boxes of 10.

An Easy-Exs alternative to MAXESS

If you're looking for an alternative to a MAXESS FlexFit, measure the hole and match it to a listed range: 6 × 6 to 8 × 8 in for the SAP0808, 10 × 10 to 14 × 14 in for the SAP1414, and 6 to 9 in round for the SAP10R. The sizes chart lists every opening and cover.

Which one suits your job

  • A square hole between 8 and 8-3/4 in. The MAXESS APF8 is listed for it; no Easy-Exs spring panel fits that band as it is.
  • A square hole between 12-3/4 and 14 in. The Easy-Exs SAP1414.
  • A square hole from 6 × 6 to 8 × 8 in, or 10 × 10 to 12-3/4 in. Either maker's spring panel.
  • An order in US dollars, or a round hole. The Easy-Exs range, sold online here.

Sources

Checked November 16, 2026. Prices and specifications change; the maker's current documents govern.

MAXESS is Novera Products Inc.'s name. Buy Access Panels is not affiliated with or endorsed by Novera Products, Maxxess Systems or Home Hardware and does not sell MAXESS products.

Comparing brands?

Side-by-side notes on the access panel brands people search for, from each maker's published specifications:

All brand comparisons

Questions

Is Maxxess the same as MAXESS?

The access panels are MAXESS, with one X, made by Novera Products in Ontario, and Novera prints it MAXESS™. Maxxess Systems is a separate access-control company; we found no access panels on its site.

What size hole does the MAXESS FlexFit 8 in panel fit?

Novera's spec sheet lists openings from 6 × 6 in up to 8-3/4 × 8-3/4 in for the APF8, under a 10 × 10 in panel; Home Hardware's copy says up to 8-1/2 in. The Easy-Exs SAP0808 fits square openings from 6 × 6 to 8 × 8 in under a 10 × 10 in cover.

Which MAXESS access panel should I buy?

Measure your hole first. A square hole from 6 × 6 to 8-3/4 in takes the FlexFit APF8, and one from 10 × 10 to 12-3/4 in the APF12, according to Novera's spec sheet. For a hole between 12-3/4 and 14 in, the Easy-Exs SAP1414 fits, from 10 × 10 to 14 × 14 in.

Which panel fits a 13 × 13 in hole?

The Easy-Exs SAP1414, which fits square openings from 10 × 10 to 14 × 14 in under a 16 × 16 in cover. The MAXESS FlexFit APF12 is listed for openings up to 12-3/4 × 12-3/4 in under a 14 × 14 in panel.

How much does a MAXESS FlexFit panel cost?

On November 16, 2026, Home Hardware listed the FlexFit APF8 at CAD 14.99 and the APF12 at CAD 22.99. Prices change; the retailer's page has the current ones. Each Easy-Exs product page shows its own price in your store's currency.

Are MAXESS or Easy-Exs panels fire-rated?

No. Novera's FlexFit spec sheet calls it a non-rated plastic access panel, and none of the Easy-Exs panels or doors is fire-rated.