Skip to content
Buy Access Panels

Brand comparison

Bauco access panels and Easy-Exs: which job each is for

Bauco and Easy-Exs solve different problems. Bauco panels are aluminium-framed doors with a factory drywall inlay, set into a framed opening and finished with the wall. Easy-Exs panels are white plastic covers that close a hole you already have and come out again. This page sets out what each maker publishes, checked on November 15, 2026, so you can tell which one your job needs.

9 products

Products

The short answer

Choose by how the opening gets made. If you're framing a new wall or ceiling and want a panel that is finished with the drywall, with a 1/16 in gap around the door on the Plus II, that is the job Bauco's drywall-inlay panels are made for. If you already have a hole in finished drywall and want a cover that fits it, that is what the Easy-Exs spring panels and hinged doors do.

Side by side

Bauco Plus IIBauco SoftlineEasy-Exs spring panelsEasy-Exs hinged doors
MaterialAluminium frame, drywall inlay doorGalvanized sheet steel, white powder coatWhite plasticWhite plastic
How it goes inConcealed frame in a framed opening, finished with the wallSurface frame fixed with anchor strapsSpring-held cover dropped into the holeFramed door set into a cut-out
How it opensTouch latch; free-pivot hinge with a safety cable, removable doorTouch latch or keyed lockComes out completelyHinge and latch
SizesClear openings from 6 × 6 in, custom sizes6 × 6 to 24 × 24 inOpenings 6 × 6 to 8 × 8 in (SAP0808) and 10 × 10 to 14 × 14 in (SAP1414)6 × 6 to 12 × 16 in overall
Round optionRondo: 12, 16 and 24 inNoSAP10R: openings 6 to 9 inNo
Fire ratingNon-fire-rated assembliesNot fire ratedNot fire-ratedNot fire-rated
How it is soldDirect from Bauco, by quoteDirect from Bauco, by quoteOnline here, US or Canadian dollarsOnline here, US or Canadian dollars

Bauco's figures come from its spec sheets and product pages; Easy-Exs figures come from our product records. Each Easy-Exs door's page gives its service opening and cut-out.

How each one goes in

Bauco: “virtually invisible”, fully customizable

Bauco publishes a cut size and a rough framed opening for every panel. For the Plus II, the drywall cut is the clear opening plus 3/8 in, and the framed opening is the clear opening plus 2-1/2 in. The frame sits behind the drywall face and is finished with the wall, so the door can take the same paint, wallpaper, tile or millwork as the wall around it and match it. Its inlay options include tile backer board, to match a tiled wall, as well as plaster board and plywood, and the Plus II page also shows wood veneer and millwork finishes. Bauco's pages describe concealed hardware and a barely visible seam, so there is no visible hardware on the face; Bauco calls the result a virtually invisible finish. You can remove the Plus II door leaf completely; it hangs on a hinge with a safety cable. For large openings, the XL has a front-mount frame with an integrated drywall bead. It suits new work or a renovation where the opening can be framed.

Easy-Exs: a cover for the hole you have

A spring panel goes into the hole you have, as long as the hole is inside its listed range: the SAP0808 fits square openings from 6 × 6 to 8 × 8 in under a 10 × 10 in cover. Nothing is fixed to the wall, and the cover sits on the surface. It has no visible hardware on its face either, but it isn't flush, and to open it you remove the whole cover. The hinged PAD1212 and the other doors have a frame and need a cut-out to their size. Our guide to installing an access panel in drywall covers the cut.

Which one suits your job

  • New framing, or a finish where the panel should all but disappear. Bauco's drywall-inlay panels are built for that. If that's your next project, ask Bauco for a quote.
  • An existing hole you need to close, with access later. An Easy-Exs spring panel, if the hole is within its range, or a hinged door if you'll open it many times.
  • A round hole. Bauco's Rondo comes in 12, 16 and 24 in. The Easy-Exs round covers fit openings of about 3.75 to 4 in and 5.25 to 5.5 in (the smallest estimated), and from 6 to 9 in; see round access panels.

About Bauco Access Panel Solutions

Bauco is a Canadian company based in British Columbia. Its About page says it was founded in 1995 in Thunder Bay, Ontario, moved to the West Coast in 1997, supplied its first highrise project, a Hyatt hotel, and was recognised for product innovation at Construct Canada in 1999. Its home page says it solves problems for architects and contractors, and that architects and designers appreciate the design, and its testimonials come from architects, interior designers, installers and contractors; its project examples include a multi-family highrise and a 66-floor condominium development. On bauco.com you'll find six lines: Plus II, XL, Plus, Air, Rondo and Softline.

Bauco calls itself both manufacturer and distributor and sells factory-direct. It says a quote arrives within 24 hours, and its Plus II FAQ puts the lead time at days for small orders and a few weeks for large ones, and its Plus II page says custom sizes come with short lead times, so allow time for production and shipping before the drywall goes up.

Sources

Checked November 15, 2026. Specifications change; the maker's current documents govern.

BAUCO is Bauco Access Panel Solutions Inc.'s name. Buy Access Panels is not affiliated with or endorsed by Bauco and does not sell Bauco products.

Comparing brands?

Side-by-side notes on the access panel brands people search for, from each maker's published specifications:

All brand comparisons

Questions

Are Bauco access panels plastic?

No. Bauco's spec sheets describe aluminium frames with a factory-installed drywall inlay for the Plus II, Plus, XL and Rondo lines, and galvanized sheet steel for the Softline door. Easy-Exs panels and doors are white plastic.

Can a Bauco panel cover a hole I already have?

Bauco gives a cut opening and a larger rough framed opening for each size. For the Plus II, the cut is the clear opening plus 3/8 in and the framed opening is the clear opening plus 2-1/2 in, so it is planned into the wall. An Easy-Exs spring panel fits any opening within its listed range, such as 6 × 6 to 8 × 8 in for the SAP0808.

Are Bauco or Easy-Exs panels fire-rated?

Neither. Bauco lists its panels for non-fire-rated assemblies, and none of the Easy-Exs panels or doors is fire-rated.

Where is Bauco based?

Bauco's spec sheets give its address as Victoria, British Columbia. Its About page says the company was founded in Thunder Bay, Ontario, in 1995 and moved there in 1997.

Do you sell Bauco panels?

No. Bauco's spec sheets say it sells direct, by quote. We sell the Easy-Exs range online in US and Canadian dollars.