Skip to content
Buy Access Panels

Brand comparison

Cendrex access doors and Easy-Exs compared

Cendrex is a Montreal-based maker, founded in 1985, that sells close to 100 access doors through distributors, almost all of them steel. Its plastic RPL-00 door and its FlexiSnap magnetic door are the ones to compare with the Easy-Exs plastic spring panels and hinged doors. This page sets out what each maker publishes, checked on November 16, 2026, so you can match a product to your opening.

9 products

Products

The short answer

For a plastic cover over a hole in drywall, compare Cendrex's RPL-00 with the Easy-Exs spring panels and hinged doors. The RPL-00 is a removable door with a snap catch, glued in, for one hole size each; an Easy-Exs spring panel fits a range of holes with nothing fixed to the wall, and an Easy-Exs door keeps its cover on a hinge. For steel, fire-rated, recessed or large doors, Cendrex makes them and we don't.

Side by side: plastic

Cendrex RPL-00 8 × 8Easy-Exs SAP0808Easy-Exs PAD0808
TypeRemovable door, snap friction catch, no hingeSpring-held coverHinged door with a latch
MaterialABS with UV stabilizersPlastic, white texturedPlastic, white gloss
Hole8-3/8 × 8-3/8 in rough wall openingFits 6 × 6 to 8 × 8 in6.35 × 6.35 in cut-out
Flange or overall size2-1/4 in exposed flange10 × 10 in cover8 × 8 in overall
InstallationConstruction adhesive (spec sheet)Nothing fixed to the wallFrame screws on over the cut-out
Other sizes6 × 9, 14 × 14 and 14 × 29 inSAP1414: 10 × 10 to 14 × 14 in6 × 6, 12 × 12 and 12 × 16 in overall
Fire ratingNone statedNot fire-ratedNot fire-rated

Cendrex figures come from its product pages and spec sheets; Easy-Exs figures come from our product records. Cendrex's product page and spec sheet differ on the RPL-00's finish (white textured, or white powder coat primer) and on the 6 × 9 in hole; we used the spec sheet's 6-3/8 × 9-3/8 in.

The FlexiSnap

Cendrex's FlexiSnap (FLE-00) is a steel door that closes with four magnets in an adjustable frame, with two security cables and a concealed flange. Cendrex makes it for openings from 6.5 to 8 in, 10.5 to 12 in and 14 to 15.5 in, under panels of 10-1/4, 14-1/4 and 17-3/4 in square, and Cendrex's store finder lists RONA, BMR, Réno-Dépôt, Lowe's and others. Like an Easy-Exs spring panel, it adapts to a range of holes; unlike it, it is steel and holds by magnets. The Easy-Exs SAP0808 fits 6 × 6 to 8 × 8 in and the SAP1414 10 × 10 to 14 × 14 in.

Cendrex steel and fire-rated doors

Most of Cendrex's range is steel, sized so the wall opening is the door size plus 1/4 in:

  • CTR-00. A flush 16 gauge steel door with a hidden flange, a concealed hinge and a screwdriver cam latch, from 8-1/4 × 8-1/4 to 24 × 36 in.
  • AHD-00. A flush steel door with a 1 in exposed flange, a pin hinge and a cam latch, from 6 × 6 to 24 × 24 in.
  • AHA-00. A recessed steel door without a flange, on a piano hinge, that takes tile or another finish in the door.
  • PFI-00. A fire-rated insulated steel door, tested to UL 10B and CAN/ULC S104, listed for up to 3 hours in walls.

Cendrex also makes floor and roof hatches, and offers latch options such as an Allen hex head cam latch on the AHA-00. Easy-Exs makes no steel door, and none of our products is fire-rated.

Sizes and lead time

Cendrex sizes its steel doors so the wall opening is the door size plus 1/4 in, and says odd sizes of the CTR-00, AHD-00 and AHA-00 are made in 5 days, a short lead time for a custom size. Its spec sheets give the dimensions for each size, including frame depth: 1-1/2 in for the CTR-00 and AHD-00, and 1-5/8 in for the AHA-00.

About Cendrex

Les Industries Cendrex, based in Montreal, was founded in 1985 to make outdoor ashtrays (the name comes from cendrier, French for ashtray), and later added access panels, floor and roof hatches and mailboxes. Its spec sheets say the products are made in Canada. It sells through authorized distributors, with warehouses in Montreal and in nine US states, and contractors can join its Cendrex PRO program.

An Easy-Exs alternative to Cendrex

If you're looking for an alternative to a Cendrex plastic door for a hole you already have, an Easy-Exs spring panel fits a range without recutting: 6 × 6 to 8 × 8 in, or 10 × 10 to 14 × 14 in. For a new opening you'll open often, an Easy-Exs hinged door from 6 × 6 to 12 × 16 in overall, such as the PAD1212, comes with a 1:1 cut-out template. The sizes chart lists every opening and cover.

Which one suits your job

  • A commercial building with a fire-rated wall or ceiling, a recessed tile door or a large steel door. Cendrex's steel range covers those; ours doesn't.
  • A 6 × 9 or 14 × 29 in plastic door. Cendrex's RPL-00 comes in those sizes.
  • A residential wall with an existing hole from 6 × 6 to 8 × 8 in, or 10 × 10 to 14 × 14 in. An Easy-Exs spring panel, ordered online here.
  • A hinged plastic door you'll open often. An Easy-Exs PAD door.

Sources

Checked November 16, 2026. Specifications change; the maker's current documents govern.

Cendrex and FlexiSnap are Les Industries Cendrex Inc.'s names. Buy Access Panels is not affiliated with or endorsed by Cendrex and does not sell Cendrex products.

Comparing brands?

Side-by-side notes on the access panel brands people search for, from each maker's published specifications:

All brand comparisons

Questions

Does Cendrex make a plastic access panel?

Yes, one: the RPL-00, a removable ABS door held by a snap friction catch, in 6 × 9, 8 × 8, 14 × 14 and 14 × 29 in. The rest of the range is steel, including the FlexiSnap and fire-rated doors.

What size hole does the Cendrex RPL-00 8 × 8 in need?

Cendrex's spec sheet gives a rough wall opening of 8-3/8 × 8-3/8 in for the 8 × 8 in RPL-00. The Easy-Exs SAP0808 spring panel fits square openings from 6 × 6 to 8 × 8 in, and the PAD0808 hinged door needs a 6.35 × 6.35 in cut-out.

How does the Cendrex FlexiSnap hold?

With magnets. The FlexiSnap is a steel door with four magnets in an adjustable frame, made for openings from 6.5 to 8 in, 10.5 to 12 in and 14 to 15.5 in, according to Cendrex. The Easy-Exs spring panels hold with one large wire-loop spring and fit 6 × 6 to 8 × 8 in or 10 × 10 to 14 × 14 in.

Does Cendrex make a 14 x 14 access panel?

Yes. The RPL-00 plastic door comes in 14 × 14 in for a 14 × 14 in rough wall opening, and the steel CTR-00 and AHD-00 doors come in 14 × 14 in too, with a wall opening of the door size plus 1/4 in. The Easy-Exs SAP1414 spring panel fits openings from 10 × 10 to 14 × 14 in under a 16 × 16 in cover.

Are Cendrex access doors fire-rated?

Some are. Cendrex's PFI-00 is a fire-rated insulated steel door, listed for up to 3 hours in walls; its RPL-00 plastic door states no rating. None of the Easy-Exs panels or doors is fire-rated.

Where can I buy Cendrex access doors?

Through Cendrex's distributors; Cendrex doesn't sell direct. The FlexiSnap is also sold at Canadian retailers such as RONA, BMR and Réno-Dépôt, according to Cendrex. We sell the Easy-Exs range online in US and Canadian dollars.